TC4 titanium bar rod, also call as: GR5 titanium rod, TC4-Ti6Al4V-GR5 titanium alloy rod has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, etc....
TC4 titanium bar rod, also call as: GR5 titanium rod, TC4-Ti6Al4V-GR5 titanium alloy rod has a series of advantages such as excellent corrosion resistance, small density, high specific strength, good toughness and weldability, etc.
Titanium bar rod is widely used in aerospace, petrochemical, shipbuilding, automobile, medicine and other departments have been successfully applied
TC4 Titanium Alloy Rod, GR5 Titanium Rod, Ti6Al4V Titanium Rod Specifications:
Diameter (3.0--300) mm×L
TC4 titanium rod, GR5 titanium alloy rod, Ti6Al4V titanium rod technical requirements:
The chemical composition of titanium and titanium alloy rods shall comply with the provisions of GB/T 3620.1, and when repeated tests are required, the allowable deviation of the chemical composition shall comply with the provisions of GB/T 3620.2.
The diameter or side length of the hot-worked bar and its allowable deviation shall comply with the provisions of Table 1.
After hot processing, the bar is turned (ground) and cold-rolled, and the allowable deviation of the diameter of the cold-drawn bar should meet the industry regulations.
The out-of-roundness of the turned (ground) bar after hot working should not be greater than half of its dimensional tolerance.
The indefinite length of the processed bar is 300-6000mm, and the indefinite length of the annealed bar is 300-2000mm. The fixed or double length should be within the range of the indefinite length. The allowable deviation of the fixed length is +20mm; times The length of the ruler should also be included in the incision amount of the bar, and the amount of each incision is 5mm. The length of fixed or multiple rulers should be indicated in the contract.
Method and process for smelting titanium materials such as TC11 titanium rods, TC4 titanium rods, and titanium alloy rods
With the development of science and technology and the improvement of people's living standards, titanium is used more and more in industrial production, aerospace, national defense and military industry and daily life, so the requirements for titanium and titanium alloy c and performance are getting higher and higher. The smelting of titanium alloy raw materials is undoubtedly the most important and critical part. The quality of its smelting directly affects whether the performance indicators of the subsequent processed products meet the product requirements, thus promoting the development of modern smelting technology for titanium alloys, including electronic The development of new technologies such as beam and plasma cooling bed furnaces has created good conditions and foundations for improving the metallurgical quality and mechanical properties of titanium alloy ingots.
TC4 Titanium Rod, GR5 Titanium Alloy Rod, Ti6Al4V Titanium Rod Application:
Aerospace, aviation, navigation, ships, desalination, petroleum, chemical industry, mechanical equipment, nuclear power equipment, power equipment, automobile and motorcycle parts, sports and leisure, medical parts, steel and metallurgy, high-tech fields.
