TA1 TA2 TA9 TA10 Cold drawn seamless titanium tubeis light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc...
TA1 TA2 TA9 TA10 Cold drawn seamless titanium tubeis light in weight, high in strength and superior in mechanical properties. It is widely used in heat exchange equipment, such as shell and tube heat exchangers, coil heat exchangers, serpentine heat exchangers, condensers, evaporators and conveying pipes, etc. Many nuclear power industries use titanium tubes as standard tubes for their units. Titanium pipes implement two national standards according to different requirements and performances: GB/T3624-2010 GB/T3625-2007 ASTM B337 338
Product name TA1 TA2 TA9 TA10 Cold drawn seamless titanium tube
Diameter: 3mm-600mm Wall thickness: 0.2mm-40mm Length: 6m
Product Category
Pure titanium tube and titanium alloy tube
product material
TA1/TA2/TA3/TA10/TC4 etc.
Whether customized: spot + customized
Implementation of the standard GB/T3624-2010 3625-2010 B337 B338
TA1 TA2 TA9 TA10 Cold drawn seamless titanium tube
|
钛管材外径的允许偏差（mm）Allowable deviation of outer diameter of (mm) |
||||||
|
Outer diameter |
3~10 |
>10~30 |
>30~50 |
>50~80 |
>80~100 |
>100 |
|
allowable deviation |
±0.15 |
±0.30 |
±0.50 |
±0.65 |
±0.75 |
±0.85 |
Characteristics of TA1 TA2 TA9 TA10 Cold drawn seamless titanium tube
- Cold drawn seamless titanium tubeLightweight
The density of titanium is 4.51g/cm3, which is higher than that of aluminum (2.8cm3) and lower than that of steel (7.9/cm3). Although titanium is not the hardest metal, its specific strength is the highest among all metals. 40% lighter than steel
- Corrosion resistance of Cold drawn seamless titanium tube
Titanium is very stable in many media. Strong acid, strong alkali and even aqua regia, which is called "the king of acids", cannot rot it. Titanium can be placed in the deep sea for 100 years without rusting at all, because in the air or In an oxygen-containing medium, a very thin, dense and strong oxide film will be formed on the surface of titanium to protect it from corrosion. Even if it is worn, it will heal itself or regenerate quickly. Metal".
- Not afraid of extreme cold and high temperature of Cold drawn seamless titanium tube
The melting point of titanium is 1668°C. Titanium alloys can be used for a long time at a high temperature of 500°C without fatigue. The strength of titanium will increase as the temperature decreases, but the plasticity changes are not large. Pure titanium is at -259°C. In the extremely cold environment, it can still maintain good toughness and toughness, and avoid the cold brittleness of ordinary metals. It is the best material for low-temperature operation equipment.
- Good thermal conductivity of Cold drawn seamless titanium tube
Although the thermal conductivity of titanium is lower than that of carbon steel and copper, due to the excellent corrosion resistance of titanium, the wall thickness of titanium products can be greatly reduced, and the heat exchange between the surface and the steam is dropwise condensation, which reduces the thermal resistance of the titanium surface. No scaling can reduce thermal resistance and significantly improve the thermal conductivity of titanium
