TA3 Gr.3 titanium coil sheet plate also named unalloyed titanium plate sheet TA4 Gr.4 the strength is not high, but the plasticity is good, it is easy to be processed into a row, and the stamping, welding and cutting performance is good; it has good corrosion resistance in the atmosphere, seawater, wet ammonia and oxidizing, neutral and weakly reducing media...
TA3 Gr.3 titanium coil sheet plate also named unalloyed titanium plate sheet TA4 Gr.4 the strength is not high, but the plasticity is good, it is easy to be processed into a row, and the stamping, welding and cutting performance is good; it has good corrosion resistance in the atmosphere, seawater, wet ammonia and oxidizing, neutral and weakly reducing media; Gr. 1TA1.Gr.4 The tensile strength of TA4 is slightly higher than that of industrial pure titanium, and it can be used as a structural material in the medium strength range. The domestic welding wire is mainly used.
Introduction of TA4 Gr.4 titanium coil sheet plate:
Product name: High quality pure titanium plate
Product model: TA4,Gr4,
State: M (Y/R/ST) hot working state (R), cold working state (Y), annealing state (M)
Production technology: cold rolling, hot rolling and cold rolling.
Production standards: There are two implementation standards for titanium plates, the national standard is GB/T3621-2007, GB/T13810-2007, and the American standard is ASTM B265, ASTM F136, ASTM F67, AMS4928.
Surface treatment: bright, polished, pickled, sandblasted, etc.
Common size: thickness 0.3mm-5.0mmx width 1000mmx length 2000mm~3500mm
Thickness 6.0mm-30mmx width 1000mm~2500mmx length 3000mm~6000mm
Thickness 30mm-80mmx width 1000mmx length 2000mm
(The size is customized according to customer requirements.)
Packing: Export standard wooden box or wooden pallet.
TA4 Gr.4 titanium coil sheet plate chemical composition：
|
Alloy
|
Element (%) |
Fe |
C |
N |
H |
O |
AL |
Si
|
Other element |
Ti |
||
|
Each |
Total |
|||||||||||
|
TA4 |
Max |
0.5 |
0.08 |
0.05 |
0.015 |
0.4 |
- |
- |
0.1 |
0.4 |
Remain |
|
TA4 Gr.4 titanium coil sheet plate Mechanical properties:
|
Alloy
|
Temper
|
Yield Strength Rm/Mpa |
Tensile strength Rp0.2/Mpa |
Elongation rate after break A/% |
|
TA4 |
M |
≥580 |
485-655 |
≥20 |
TA4 Gr.4 titanium coil sheet plate application areas:
TA4 Gr.4 titanium coil sheet plate mainly used for stamping parts and corrosion-resistant structural parts with working temperature below 360 degrees, low stress but requiring high plasticity, such as: aircraft skeleton and skin, engine accessories, seawater corrosion-resistant pipes, valves and pumps for ships. Seawater desalination system parts, chemical heat exchangers, pump bodies, distillation towers, cooler agitators, tee, impellers, fasteners, ion pumps, compressor valves and pistons, connecting rods, vanes of diesel engines Spring etc.
